Phottix Mitros for Canon v1.02B7 Firmware available

March 24, 2014

Phottix Mitros TTL Flash

Phottix Mitros TTL Flash

Phottix is releasing a firmware upgrade for its Phottix Mitros TTL Flashes for Canon. Firmware Version v1.02B7 Change logs, install instructions and files are available in the below download links.

This firmware upgrade is for Mitros flash only – not Phottix Mitros+ flashes.

What does the upgrades do?

  • Prevent possible fresnel lens damage after extreme continuous flashes at 1/1 output, with zoom set at 24mm.
  • Minimizes alkaline battery overheating issues.


Phottix Mitros for Canon Version v1.02B7 Mac Installer

Phottix Mitros for Canon Version v1.02B7 PC Installer

Please Note:

There have been some difficulties encountered by Mac users trying to upgrade their Mitros flashes. For this Phottix offers a deep apology.

The Mac Upgrade Application V1.64 works with only newer hardware versions of the Mitros.

Mitros for Canon— 1.04 or later version
Mitros for Nikon—- 1.03 or later version

If the hardware version of Mitros flashes is lower than above versions, the Mitros can only be upgraded on a PC using Windows OS or a Mac with Windows Bootcamp Partition. Mac users, again, an apology.

To check the hardware version of your Mitros Flash.

  1. Press and hold the HSS/SCS button and turn on the flash.
  2. This will open the “versions” screen. If the hardware version on the flash is lower than what is listed above the Mac upgrade software cannot be used.
Mitros Flash Versions Screen

Mitros Flash Versions Screen

Comments on this entry are closed.

Previous post:

Next post: